Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope.
Our residential electrical services cover everything from complete house wiring for new constructions to electrical upgrades, fixture installations, and emergency repairs. We provide electrician services all over Lahore, including Bahria Town Lahore, DHA Lahore, Gulberg, Model Town, Johar Town, Wapda Town, Muslim Town and other major Lahore areas.
Our Residential Electrical Services
Our Residential Electrical Services: Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope.
Complete House Wiring
A house-wiring job should start with the expected connected load, room layout and distribution-board capacity. Cable routes, circuit separation and earthing need to be planned before walls are closed or finishes are disturbed.
For new or renovated homes, the useful questions are where high-load appliances will be used, how many circuits are needed and whether protective devices are correctly sized for the final installation.
- List major loads such as AC units, geysers, ovens and water pumps before circuit sizing.
- Keep lighting, socket and high-load appliance circuits separated where practical.
- Confirm earthing continuity and suitable protective devices at the distribution board.
- Plan cable routes before plaster, ceilings or cabinetry make access difficult.
- Label completed circuits so future fault finding is easier.
- List major loads such as AC units, geysers, ovens and water pumps before circuit sizing.
- Keep lighting, socket and high-load appliance circuits separated where practical.
A house-wiring job should start with the expected connected load, room layout and distribution-board capacity. Cable routes, circuit separation and earthing need to be planned before walls are closed or finishes are disturbed. Confirm the property layout and affected circuit before deciding the final work sequence.
Electrical Rewiring
Rewiring is usually considered when insulation is damaged, circuits are repeatedly overloaded, joints are unsafe or the existing wiring no longer suits the property's load. The decision should be based on inspection rather than age alone.
A rewiring scope should identify which circuits actually need replacement, what can be retained safely and how new cables will be routed with minimum unnecessary damage to finished surfaces.
- Check for heat damage, brittle insulation, loose joints and recurring breaker trips.
- Compare existing cable sizes with the loads now connected to each circuit.
- Inspect earthing and the condition of the distribution board before extending circuits.
- Agree wall, ceiling or conduit access before work begins.
- Test and label each completed circuit after the agreed rewiring work.
- Check for heat damage, brittle insulation, loose joints and recurring breaker trips.
Ceiling Fan Installation
A ceiling fan needs more than a live wire: the mounting point must be mechanically secure, the regulator or control compatible and the electrical connection protected from loose or overheated joints.
Light Installation
Lighting work should match the fitting type, ceiling or wall support and the circuit already serving the area. Heavy decorative fittings, outdoor lights and damp locations can require different mounting and protection.
- Confirm the fitting wattage and driver requirements.
- Check the switch, neutral and earth connection at the point.
- Use appropriate support for heavy or suspended fittings.
- Protect outdoor or damp-area fittings from moisture as required.
- Test switching and visible flicker after installation.
- Confirm the fitting wattage and driver requirements.
Switch & Socket Installation
Socket and switch work should verify the condition of the back box, cable terminations, polarity and earthing instead of replacing only the visible faceplate. High-load appliances may need a dedicated circuit rather than a standard socket.
Geyser & Water Heater Installation
Electric water heaters draw a sustained load, so the circuit rating, isolator, earthing and protective device matter as much as the heater itself. The supply should be checked before a new unit is connected.
LED TV Mounting
TV mounting combines mechanical support with neat power and signal routing. Wall type, bracket rating, viewing height and cable access should be confirmed before drilling.
Water Pump Installation & Repair
Water-pump faults can come from the electrical supply, capacitor, motor, pressure control or the plumbing side. A useful diagnosis separates electrical symptoms from priming, blockage or mechanical problems.
Smart Home Wiring
Smart switches, sensors and controllers work best when power, neutral conductors, data paths and device locations are planned before finishes are complete. Compatibility between devices and the existing wiring should be checked first.
- Confirm whether smart switches require a neutral conductor.
- Separate low-voltage/data wiring from mains wiring appropriately.
- Plan Wi-Fi or network coverage for connected controllers.
- Allow access to hubs, relays and power supplies for maintenance.
- Document device locations and circuit assignments.
Electrical Safety Services
A safety review focuses on the condition of protective devices, earthing, visible wiring, overloaded points and signs of overheating. Findings should be linked to specific corrective work rather than broad replacement recommendations.
- Earthing/Grounding Installation
- Lightning Arrester Installation
- Surge Protection Devices
- Electrical Safety Audits
Planning Residential Electrical Work
- Describe the symptom and affected circuit or room.
- Confirm the existing wiring and protective device condition.
- Agree labour and material scope before changes are made.
- Keep earthing and safe isolation part of the assessment.
- Test the affected circuit after the agreed work.
- Describe the symptom and affected circuit or room.
Residential Electrician Pricing in Lahore
Residential Electrician Pricing in Lahore: Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope.
| Service | Planning / Quote Note |
|---|---|
| Visit Charge (includes minor repair) | Quoted after scope check |
| Ceiling Fan Installation | Quoted after scope check |
| Light Fixture Installation | Quoted after scope check |
| Switch/Socket Installation (per point) | Quoted after scope check |
| New Wiring (per sq ft) | Quoted after scope check |
| DB Board Installation | Quoted after scope check |
| Earthing Installation | Quoted after scope check |
Residential Electrician Pricing in Lahore: Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope. Confirm the property layout and affected circuit before deciding the final work sequence.
Areas We Serve
Areas We Serve: Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope.
- Bahria Town Lahore
- DHA Lahore
- Agree labour and material scope before changes are made.
- Keep earthing and safe isolation part of the assessment.
- Test the affected circuit after the agreed work.
- Describe the symptom and affected circuit or room.
- Confirm the existing wiring and protective device condition.
Book a Residential Electrician Today
Book a Residential Electrician Today: Residential electrical work should be based on the existing wiring, connected load and condition found at the property. The pages below explain the main checks for each type of job so a quotation can be based on the actual scope.